H265 3G 4G WIFI GPS Optional Mobile DVR For Car Bus 4 CH 1080P
| Brand | Multifunctional Dual SD Mobile DVR |
| Model | VM-6004-1080P |
| AI Functions | Support Driver Face ID &Comparison ,DMS(Option) |
Interface | USB*2(USB Tools & Fireproof black box) |
Video |
4CH AHD1080P/720P 1CH IPC Video Input(Option) CVBS*1 output,HDMI*1 output | Support 100M/1000M Net Port IPC 1080P Input |
| IO_IN*4, IO_OUT*1,RS485*1,RS232*2 |
| 12V Output,Max: 1A |
| Video Compression | Compatible H.265/H.264 Video Compression | Voltage | DC8V—36V Input |
| Audio | 5 Input,2ch Output,G.711A Audio Compression | Power | < 6W (No Peripheral) |
Wireless Communication | 4G:TD-LTE/FDD-LTE 3G:EVDO/WCDMA/TD-SCDMA WIFI/BT (optional) |
Operation Environment |
-25℃—＋75℃ |
| Storage | 2*SD(512GB Max) , External USB interface for data backup | Humidity | 10％—95％ |
| Satellite Position | Beidou/GPS/GLONASS(Option) | Protection Level | IP43 |
| Control Mode | IR Remote Control,Tools APP,Platform | Dimension | 140 x 160x 48mm(L x W x H) |
Attention:
In order to enable users use this series of products safely and satisfactorily for a long time, please read the following warnings
before installing and using the products:
1. All installation and maintenance must be performed by professional technicians.
2. The normal working voltage range of the device is DC 8V~36V. Please
notthat the power input wires should be connected correctly and keep
the stability of the power input. The output cannot be short-circuited.
3. The device outputs is 12V external voltage, which is only used for
camera power supply. It is not allowed to connect any non-recommended
equipment.
4. Connect correctly the ground wire of the device to the ground wire
of the vehicle to form a circuit.
5. The equipment should be installed in a dry and ventilated
environment to avoid moisture, rain and a cleaning and flushing position,and keep
the equipment away from heat, dust and strong magnetic field.
6. Please install the equipment as far as possible on the vehicle
where the vibration is weak, improve the stability of the equipment and
prolong the service life.
7. Do not stack debris within 20cm around the installation equipment,
and do not put heavy objects on device to ensure the heat
dissipation environment.
8. The device do not support hot swap, please do not insert or remove
storage media(SD/HDD/SSD) or Sim card or other accessories while the device
is powered on.
9. Please perform regular maintenance on the storage hard disk or SD
card: copy the video data to the computer and format it to protect and extend
the performance and service life of the storage device. 10. Do not open or disassemble the equipment without the guidance of a
professional technician.
