8 Channels AHD 1080P Mobile DVR with 3G 4G GPS for Bus, Truck,
Train
Real-time HD Video Recording, 1080P/720P/D1/HD1/CIF for
Optional,Adjustable Frame Rate Quality |
Professional Power Design for all kinds of Vehicles, 8-36V DC; Wide
Voltage |
Hard Disk + SD card Data record storage (maximum support 2TB 2.5’
hard disk and 128GB SD card ) |
Exclusive Pre-Allocate DVR Special File System Technology |
By accidents power-off protection function |
Support GPS and G-sensor Modules Extension. 3G/4G SIM CARD Module
and WIFI Module(Optional) |
3channel-RS232 and 2channel-RS485 |
Support 3.7V/600mAh Build-in Backup Battery (Update to 1200mAh
Optional) |
Support SD card Remote Software Upgrade/OTA remote upgrade
automatically |
Support GPS Signal Uploading Unremitting in 24 hours after Power
Off |
Build-in TTS Voice Function, Public Bus-stop system (Extensible) |
Hard Disk Heater Function - Work Temperature: -30°to 70° |
Common Questions and Answers (QA) for MDVR
Q: What shall we do if recording is unavailable even when the
device is powered on and HDD is installed?
A: 1. Check that the HDD is formatted after HDD is installed and
HDD without formatting cannot be used. From the Main
Menu-Management Tool-Formatting, format the newly-installed HDD.
2. Check if the record channel is off or if timing record is set.
Recording is unavailable when it is not within the recording time
frame.
3. Check if the HDD is properly contacted, and the HDD on the front
panel is lit up.
Q: A record file is lost or no record file is found within a
certain period of time?
A: 1. Analyze to define the period of time between the final video
file is lost and the first video file is recovered.
2. Check if the device is power on within this period of time, for
example, delay record not set during mid-way shutdown or unloading
& loading.
1— Power Input interface, Input voltage is DC 6-36V
2— WiFi antenna interface, Support double WiFi.
3—30 PIN Extension Port.Including 1st-10th alarm input, RS232,RS485 interface
4—10PINExtension Port,Including 11th-16th alarm input,support 4channel alarm output
interface.
5— Video&Audio Input interface, 1-8Channels support AV input with DC 12V output:
6—Rj45 Ethernet port,It’s used for wired network connection.
7—USB data port,It’s used for data backup.
8-Speaker output interface,External speakers,etc.
9-Microphone input interface,External microphone,etc.
10- VGA HD output interface.
11-GPS antenna interface.
12-3G/4G antenna interface.
1—HDD Lock, It’s used for unloading hard disk. Device will automatically shut
down while the lock is open.
2—Front AV output interface. It’s used for standard definition AV output.
3—IC card slot. IC card should be inserted straightly with chip downwards.
4—SD card slot. SD card should be inserted straightly into slot.
5—HDD box.Press the left button,you can open the hard disk box door,and
insert into 2.5-inch hard drive.
6—SIM card slot. It’s used for SIM card.
7—USB Interface. It’s used to import or export data or upgrade;
8—RS232 Series port. It’s used for device debugging or printout;
9-LCD windows :It’s used for vehicle information,driver information,print
driving information,etc.
10-LCD button:It’s used for LCD operations.
More details, pls freely contact us, Skype:
vm802@visionmastercn.com
